Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #196

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Secure Whip to Hotend
[* black] There will be a loop of wire between the long 10 pin connector and the 2 connectors on the other side.
[* black] Take a zip tie and secure the loop to the hotend board as shown in the pictures.
[* black] Pic 2 shows the secured and zip tied hotend whip wires. Trim the zip tie to clean the install.