Changes to Step #196
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] This step is optional if they have extra zip ties leftover from the build and want extra security |
|---|---|
| + | [* black] There will be a loop of wire between the long 10 pin connector and the 2 connectors on the other side. |
| + | [* black] Take a zip tie and secure the loop to the hotend board as shown in the pictures. |
| + | [* black] Pic 2 shows the secured and zip tied hotend whip wires. Trim the zip tie to clean the install. |