Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #195

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Making sure tab is fully seated before sliding down the boot
+[* black] Pic 1 shows the 10 pin plug fully seated with the clip in place and secured.
+[* black] Slide the boot over the 10 pin connector to cover and protect the clip and harness as shown in Pic 2.
+[* black] Pic 3 shows both boots all the way down to the hotend board and in the proper orientation.