Changes to Step #183

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[* black] Insert wisdom here.
+[* black] You will now install the glass plate for the bed from the heater/bed/glass kit.
+[* black] Holding the glass by the edges, place the glass into the recess for the heated bed.
+[* icon_caution] Fingerprints will deposit oils on the glass preventing prints from sticking to the glass. Try to keep it as clean as possible by holding the glass from the edges as shown in Pic 1.
+[* black] Rotate the 3 bed clamps to secure the glass down to the bed heat spreader.