Changes to Step #179
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Top assembly, notch goes up |
---|---|
+ | [* black] Take 3 of the acrylic corner covers and remove the protective tape. |
+ | [* black] On the upper frame, the acrylic cover will rest inside the sides sitting against the panel stop installed earlier. |
+ | [* icon_caution] Note there is a notch on the corner acrylic. This notch will be on the top of the acrylic for the upper frame. |
+ | [* black] Insert one side at a time and bend the corner acrylic around to the other side and insert it behind the side and against the panel stop. |
+ | [* black] Repeat this install on the other 2 corners of the machine so all 3 corners have acrylic installed as shown in pic 3. |