Changes to Step #169
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Install Top Plate |
|---|---|
| [* black] This step will use 6x 6-32 x 7/8" long phillips head screws. | |
| [* black] Locate the screw holes on top of each motor mount bracket and insert the screws in the holes as shown in Pic 2. | |
| [* black] Tighten all 6 screws securely to attach the top plate to the motor mount brackets. | |
| [* black] The locations of all 6 screws are outlined in Pic 3 with red arrows. |