Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #169

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[* black] Insert wisdom here.
+[* black] This step will use 6x 6-32 x 7/8" long phillips head screws.
+[* black] Locate the screw holes on top of each motor mount bracket and insert the screws in the holes as shown in Pic 2.
+[* black] Tighten all 6 screws securely to attach the top plate to the motor mount brackets.
+[* black] The locations of all 6 screws are outlined in Pic 3 with red arrows.