Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #163

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Install Extruder
[* black] Plug the extruder into the Duet. It is placed in the 4th position along the edge where the other motors are plugged in.
-[* black] Make sure the flat of the motor plug is facing towards the center of the duet as before with the other motors and shown in Pic 1.
+[* black] Make sure the flat of the motor plug is facing towards the OUTSIDE of the duet as before with the other motors and shown in Pic 1.
+[* icon_caution] As of June 2019, do not follow the pictures, but flip the plug so the wire order is opposite and the smooth side of the plug is facing away from the board, rather than towards the board as shown in the pics!
[* black] If you bought the dual extruder kit, the second extruder will plug into the last motor position.