Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #156

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Install Extruder
[* black] Here we will be installing the extruder to the mounting plate. You will use the final remaining motor, the ezr struder body, the silver ezr knob, hobbed drive roller, allen key, 4x M3x10mm long screws, 2x 6-32 x 7/8" long phillips screws and 2x 6-32 nylon insert lock nuts.
[* black] First you will want to cut and remove the zip tie holding together the ezr struder as shown in Pic 2. Discard the zip tie.