Changes to Step #153
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Connect Hotend Wires |
---|---|
[* black] The 4 pin connector from the hotend whip will plug into the first position next to the long black connector on the side of the Duet as shown in Pic 1. | |
[* black] With these wires plugged in, bundle the slack of the wires together as shown in Pic 2 and zip tie them together to bundle them and clean the wiring. | |
[* black] Pic 3 shows the zip tied bundle of hotend whip wires in the top of the machine. |