Changes to Step #153
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] The 4 pin connector from the hotend whip will plug into the first position next to the long black connector on the side of the Duet as shown in Pic 1. |
| + | [* black] With these wires plugged in, bundle the slack of the wires together as shown in Pic 2 and zip tie them together to bundle them and clean the wiring. |
| + | [* black] Pic 3 shows the zip tied bundle of hotend whip wires in the top of the machine. |