Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #151

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[title] Wire Hotend Wiring
+[title] Connect Hotend Wires
[* black] Here you will plug in the hotend thermistor to the Duet. It is the white 2 pin connector you just installed on the whip with the two white wires in it.
[* black] The thermistor plugs into the location on the duet that is the 2 pin plug in line with the endstop wires. It goes to the 6th position from the inside of the machine lined up with the endstop wires.
[* black] This position is shown in Pics 2 and 3. Make sure the plug goes into the proper location.