Changes to Step #151
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Wire Hotend Wiring |
|---|---|
| [* black] Here you will plug in the hotend thermistor to the Duet. It is the white 2 pin connector you just installed on the whip with the two white wires in it. | |
| [* black] The thermistor plugs into the location on the duet that is the 2 pin plug in line with the endstop wires. It goes to the 6th position from the inside of the machine lined up with the endstop wires. | |
| [* black] This position is shown in Pics 2 and 3. Make sure the plug goes into the proper location. |