Changes to Step #148

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

-[* black] Insert wisdom here.
+[* black] Here we will install the connectors on the end of the whip.
+[* black] The two white wires will go into one two pin connector. Polarity does not matter.
+[* black] The back of the crimped connector will face the side of the housing with the windows in it as shown in Pic 2.
+[* black] When the wire is fully inserted, you will hear the crimp click into place and will not be able to be pulled out of the housing. It should look like as shown in Pic 3.