Changes to Step #141
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Install Belt Clamps |
---|---|
[* black] With the belt out the middle of the carraiage, bend the belt up and behind the white ball joints as shown in Pic 1 to hold it in place temporarily. | |
[* black] Repeat the process with the belt coming from the bottom of the machine coming up the extrusion, behind the carriage and use a tool to bring the belt out of the carriage as shown in Pic 2. | |
[* icon_caution] As before make sure the belt is not twisted in any part, it should be flat throughout the travel. |