Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #141

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] With the belt out the middle of the carraiage, bend the belt up and behind the white ball joints as shown in Pic 1 to hold it in place temporarily.
+[* black] Repeat the process with the belt coming from the bottom of the machine coming up the extrusion, behind the carriage and use a tool to bring the belt out of the carriage as shown in Pic 2.
+[* icon_caution] As before make sure the belt is not twisted in any part, it should be flat throughout the travel.