Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #137

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Insert the belt up the extrusion from the outside, making sure to go behind the sheet metal frame.
+[* black] Also bring the belt along the extrusion behind the carriage as shown in Pics 1 and 2.
+[* black] Ensure the belt is lined up and inside the idler as shown in Pic 3.
+[* icon_caution] Make sure the belt remains flat while routing and does not have a twist in it. The teeth of the belt should be towards the extrusion.