Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #136

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] In this section we will be installing belts on the machine.
+[* black] Take one of the belts from the final assembly pack. We will start with the X tower. This is the front left tower when looking at the front of the machine.
+[* black] Insert the belt with the teeth facing the tower as shown in Pic 1 from the inside of the tower.
+[* black] Push the belt into the base of the machine and from the inside of the machine, feed the belt under the idler bearing as shown in Pic 2.
+[* black] Pull the belt to give you belt to work with outside of the machine as shown in Pic 3.