Changes to Step #134
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Install Bed Output Wire |
---|---|
[* black] Next take the black wire from the tower that only contains the single black wire. | |
[* black] Make sure the end of the wire is stripped and insert it into the large green terminal in the position next to the blue fuse as shown in Pic 2. | |
[* black] Tighten the connector to secure the wire in place. | |
[* icon_caution] When tightening the connector, the green connector will want to twist on the Duet. Hold the green connector with your hand to prevent it from twisting while tightening the connector. |