Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #134

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Next take the black wire from the tower that only contains the single black wire.
+[* black] Make sure the end of the wire is stripped and insert it into the large green terminal in the position next to the blue fuse as shown in Pic 2.
+[* black] Tighten the connector to secure the wire in place.
+[* icon_caution] When tightening the connector, the green connector will want to twist on the Duet. Hold the green connector with your hand to prevent it from twisting while tightening the connector.