Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #133

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] You will now be working with the red and black wires that are in the same tower as the green wire.
+[* black] The terminal on the Duet you will be putting these wires in is the large green terminal on the innermost side of the duet. It is the green terminal block in the middle of this side of the Duet.
+[* black] The red wire will be inserted (make sure the wire is stripped) into the position furthest from the blue fuse as shown in Pic 2.
+[* black] The black wire will go into the position of that green terminal which is directly next to the blue fuse as shown in Pic 3.
+[* black] Hold the green terminal with your hand to avoid it twisting and tighten flat head screws in the green terminal to secure them. Secure these wires tightly.
+[* icon_caution] When tightening these terminals, the green connector will want to twist on the Duet. Hold the connector with your hand to prevent it from twisting while tightening the terminals.