Changes to Step #130
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] Now you will place the upper frame on the top of the machine. |
+ | [* black] Align the side of the upper frame that has the large opening shown in Pic 1 with the front of the machine. |
+ | [* black] Feed the wires up through the holes for the extrusion and pull them out of the way and lay the upper frame on each tower as shown in Pic 2. |