Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #127

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

[title] Motor Wiring
[* black] Here we will plug in the X motor. This is the motor on the bracket on the opposite side of the Duet board.
[* black] Plug the motor into the third position from the corner of the board as shown in Pic 2.
-[* icon_caution] When plugging the motor in, make sure the flat side of the plug is facing the inside of the Duet board as shown in Pic 2.
+[* icon_caution] ***UPDATE**** As of June 2019, the motors must be plugged in with the smooth side of the plug facing the outside of the board, contrary to the pictures, the plugs will be flipped but remain in the same locations.
[* black] The X motor should be plugged in as shown in Pic 3.