Changes to Step #127

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Motor Wiring
[* black] Here we will plug in the X motor. This is the motor on the bracket on the opposite side of the Duet board.
[* black] Plug the motor into the third position from the corner of the board as shown in Pic 2.
[* icon_caution] When plugging the motor in, make sure the flat side of the plug is facing the inside of the Duet board as shown in Pic 2.
[* black] The X motor should be plugged in as shown in Pic 3.