Changes to Step #127
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] X motor |
---|---|
+ | [* black] Here we will plug in the X motor. This is the motor on the bracket on the opposite side of the Duet board. |
+ | [* black] Plug the motor into the third position from the corner of the board as shown in Pic 2. |
+ | [* icon_caution] When plugging the motor in, make sure the flat side of the plug is facing the inside of the Duet board as shown in Pic 2. |
+ | [* black] The X motor should be plugged in as shown in Pic 3. |