Changes to Step #126
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Clean Motor Wiring |
|---|---|
| [* black] This step we will bundle up the motor wires to reduce the slack on them. | |
| [* black] Wrap the wires for the motors as shown in Pic 1. | |
| [* icon_caution] Leave enough length to reach the side of the duet with the white plug so the wires can reach the plugs. | |
| [* black] Place a zip tie around the center of the bundle of each motor wire to hold the bundle in place as shown in Pic 2. | |
| [* black] Trim the zip tie excess to make a clean zip tie bundle as shown in Pic 3. |