Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #126

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] This step we will bundle up the motor wires to reduce the slack on them.
+[* black] Wrap the wires for the motors as shown in Pic 1.
+[* icon_caution] Leave enough length to reach the side of the duet with the white plug so the wires can reach the plugs.
+[* black] Place a zip tie around the center of the bundle of each motor wire to hold the bundle in place as shown in Pic 2.
+[* black] Trim the zip tie excess to make a clean zip tie bundle as shown in Pic 3.