Changes to Step #125
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Clean Endstop Wiring |
---|---|
[* black] Locate the black wire clip with pre-installed double sided tape and remove the cover from the adheasive as shown in Pic 1. | |
[* black] Insert all 6 enstop wires into the clip and lock the clip down in place. It will snap to secure the wires. | |
[* black] Install the wire clip next to the duet to secure the endstop wires as shown in Pic 3. |