Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #125

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Locate the black wire clip with pre-installed double sided tape and remove the cover from the adheasive as shown in Pic 1.
+[* black] Insert all 6 enstop wires into the clip and lock the clip down in place. It will snap to secure the wires.
+[* black] Install the wire clip next to the duet to secure the endstop wires as shown in Pic 3.