Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #122

Edit by Andrew Dunne

Edit approved by geneb

Before
After
Unchanged

Step Lines

[title] Wiring Endstops to Duet
[* black] Here we will connect the endstop wiring.
-[* black] Start with the X endstop. This is the pair of black wires coming from the motor bracket on the opposite side of the rambo as shown in Pic 1.
+[* black] Start with the X endstop. This is the pair of black wires coming from the motor bracket on the opposite side of the Duet as shown in Pic 1.
[* black] Plug the endstop into the X endstop plug as shown in Pic 2. The X endstop is the third three pin plug from the fuses on the Duet.