Changes to Step #122
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| + | [title] Wiring Endstops to Duet |
|---|---|
| [* black] Here we will connect the endstop wiring. | |
| [* black] Start with the X endstop. This is the pair of black wires coming from the motor bracket on the opposite side of the rambo as shown in Pic 1. | |
| [* black] Plug the endstop into the X endstop plug as shown in Pic 2. The X endstop is the third three pin plug from the fuses on the Duet. |