Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #121

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Install Cable Hub cont.
[* black] Once you insert the cable mount hub in the upper frame, secure into place with the nut from the inside as shown in Pic 2.
[* black] Tighten the nut to the cable mount hub very tight to hold in place and secure it.
[* icon_note] The cable mount hub has a 2 hex shaped flats on it. The larger piece is for locking the wires inside, and the smaller one that sits against the upper frame can be used to hold the hub in place while tightening the nut.