Changes to Step #118

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Attach Motor Mounts
[* black] Flip the sheet metal frame upside down so the bottom is facing up so you can work on it.
[* black] Put the small shim on the endstop side of the motor bracket as shown in Pic 2. There is a notch in the shim to allow the endstop switch to be not blocked. Pay attention to this orientation.
[* black] Using the 6-32 x 7/8" long screws, secure the motor brackets to the top frame as shown in Pic 3.