Changes to Step #113

Edit by Andy Oprisko —

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] The board support should be installed as shown in Pic 1 with the screw coming from the underside, through the sheet metal and into the board support.
+[* black] Install all 4 board supports.
+[* black] Orient the top of the board supports as shown in Pic 2. Use a pair of pliers to rotate the supports so they are angled to hold the corners of the Duet board as shown in Pic 2.
+[* black] Insert the Duet into the outermost 2 board supports as shown in Pic 3.