Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #111

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Line the Duet Panel Cover up with the hole on the upper frame from behind the frame as shown in Pic 1.
+[* black] Loosely install the two #4 sheet metal screws into the Panel Cover through the sheet metal.
+[* black] Slide the panel cover to the top of the slotted holes on the sheet metal and tighten. The screws thread directly into the plastic of the Duet Panel Cover.
+[* black] The panel should be attached as show in Pic 3.