Changes to Step #107

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Install Bed Clamps
[* black] From the underside of the heated bed, hold one M3 nylon lock nut and tighten it with a screwdriver to tighten the build plate clamp in place.
[* black] Do not over tighten this screw as you will still want to be able to rotate the build plate clamp. Just snug is good
[* black] Install a second nylon lock nut on the same screw to prevent any twisting or vibration from loosening the build plate clamps as shown in Pic 3.