Changes to Step #107
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] From the underside of the heated bed, hold one M3 nylon lock nut and tighten it with a screwdriver to tighten the build plate clamp in place. |
| + | [* black] Do not over tighten this screw as you will still want to be able to rotate the build plate clamp. Just snug is good |
| + | [* black] Install a second nylon lock nut on the same screw to prevent any twisting or vibration from loosening the build plate clamps as shown in Pic 3. |