Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #106

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Install Bed Clamps
[* black] This step will use 3 build plate clamps, 3x M3 x 18mm long phillips head screws, and 6x M3 lock nuts.
[* black] Place the M3 x 18mm long screws through the build plate clamps as shown in Pic 2.
[* black] Insert the screw with build plate clamp through the 3 tabs on the heated bed as shown in Pic 3.