Changes to Step #106
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] This step will use 3 build plate clamps, 3x M3 x 18mm long phillips head screws, and 6x M3 lock nuts. |
+ | [* black] Place the M3 x 18mm long screws through the build plate clamps as shown in Pic 2. |
+ | [* black] Insert the screw with build plate clamp through the 3 tabs on the heated bed as shown in Pic 3. |