Changes to Step #105
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] This step will use 6x 6-32 x 3/4" long phillips head screws. |
+ | [* black] In front of each tower will be 2 holes that will secure the sheet metal cover to the tower brackets. |
+ | [* black] Attach all 6 screws using a standard P2 Phillips screwdriver. |
+ | [* black] Pic 3 shows the location of all 6 screws. Tighten these screws to secure the sheet metal to the brackets. |