Changes to Step #100
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* black] This step will use the 6x 1/4-20 x 1/2" long button cap screws, 6x thin nylon lock nuts, and one spike grounding washer. |
+ | [* black] Turn the machine on the side so you have access to the power supply bracket panel and the bottom of the machine. |
+ | [* black] Insert one 1/4-20 x 1/2" long button cap screw through the hole on the bottom under the power plug side of the sheet metal as shown in Pic 3. |