Changes to Step #98
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Install Panel Stops |
---|---|
[* black] You will now use 2 nylon push rivets and 2 of the panel stop pieces (shown in Pic 1). | |
[* black] In the middle holes of the sheet metal cover, you will insert the nylon push rivet through the sheet metal and into the panel stop. | |
[* black] Push the rivet head to secure the panel stop to the back side of the sheet metal cover. The panel stop is shaped like a cone, and the thinner side of the cone will face the sheet metal as shown in Pic 2. |