Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #97

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Push down the sheet metal cover over the brackets all the way as shown in Pic 1. The brackets will slightly stick out of the sheet metal cover.
+[* black] Using 2x nylon push rivets, secure the sheet metal cover to the power supply bracket through the lower holes as shown in Pic 2.
+[* black] Press the rivet head to lock the cover plate to the power supply bracket.