Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #95

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Install Lower Frame
[* black] With the nameplate and logo facing the front of the machine, place the lower sheet metal cover over the 3 towers.
[* black] Feed the wires and aluminum through the 3 corner holes of the sheet metal and slide it down to the base of the machine.
[* black] You will see the large opening on the sheet metal will be on the side where the power plug and switch are located as shown in Pic 3.