Changes to Step #94
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
+ | [title] Install Base Fan |
---|---|
[* black] Insert the fan with the arrow facing the sheet metal over the 4 screws. | |
[* black] Place a washer over each of the 4 screws and secure with the M3 nylon lock nuts. | |
[* black] Pic 3 shows the o-ring, then fan, then washer, then nylon lock nut. | |
[* icon_note] Do not over-tighten the lock nut on the fan to over squish the o-ring. You want there to be a gap between the fan and the sheet metal as shown in Pic 3. |