Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #94

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] Insert the fan with the arrow facing the sheet metal over the 4 screws.
+[* black] Place a washer over each of the 4 screws and secure with the M3 nylon lock nuts.
+[* black] Pic 3 shows the o-ring, then fan, then washer, then nylon lock nut.
+[* icon_note] Do not over-tighten the lock nut on the fan to over squish the o-ring. You want there to be a gap between the fan and the sheet metal as shown in Pic 3.