Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #93

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

+[title] Install Base Fan
[* black] Note the orientation of the fan . The fan has an arrow facing one side of the fan.
[* black] This fan is used as an exhaust and the arrow should face the sheet metal.
[* black] Insert the 4 M3 x 35mm long phillips screws from the outside of the sheet metal and through the 4 holes for the fan.
[* black] Insert the o-rings over each of the 4 screws from the back side of the sheet metal to hold the screws in place. These o-rings will act as a vibration damper to reduce vibration noise.