Changes to Step #89

Edit by Andy Oprisko

Edit approved by Andy Oprisko


Step Lines

+[title] Mount Heated Bed
[* black] This step you will need the 3x M4 x 10mm long flat head screws from the lower hardware pack to attach the bed to the PEEK insulators.
[* black] Screw the M4 x10mm flat head screws through the bed into the PEEK insulators at each of the 3 mounting tabs on the heated bed as shown in Pic 2.
[* black] Pic 3 shows the 3 locations of the tabs you will be screwing the bed to the PEEK insulators.