Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #89

Edit by Andy Oprisko

Edit approved by Andy Oprisko

Before
After
Unchanged

Step Lines

-[* black] Insert wisdom here.
+[* black] This step you will need the 3x M4 x 10mm long flat head screws from the lower hardware pack to attach the bed to the PEEK insulators.
+[* black] Screw the M4 x10mm flat head screws through the bed into the PEEK insulators at each of the 3 mounting tabs on the heated bed as shown in Pic 2.
+[* black] Pic 3 shows the 3 locations of the tabs you will be screwing the bed to the PEEK insulators.