Changes to Step #88
Edit by Andy Oprisko —
Edit approved by Andy Oprisko
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Strip approximately a half inch of the wires in the orange tube coming from the heated bed. |
| + | [* black] Feed the wires in the orange silicone through the large hole of the bracket of the X tower as shown in Pic 1 and 2. |
| + | [* black] Attach the red wire from the heated bed to the wago connector with the white wire in the other side of it. |
| + | [* black] Attach the black wire of the heated bed in the first wago connector that has the black wire in the other position already installed in previous steps. |
| + | [* black] Your bed should be attached to the connectors as shown in Pic 3. |